Nhà> Blog> Nylon treatment agent - solve the problem of poor adhesion of nylon material painting

Nylon treatment agent - solve the problem of poor adhesion of nylon material painting

March 10, 2023

We all know that nylon materials have poor surface physical properties and poor adhesion, and often require special handling before they can be effectively attached. The nylon treatment agent came into being, it can effectively increase the surface adhesion of nylon material, but the production of nylon treatment agent so many manufacturers, in the end a kind of how to make manufacturers feel at ease? I believe that in this respect, Dongguan Yuanya Chemical Co., Ltd. can definitely assure you that the nylon treatment agent is the main product of Dongguan Yuanya. It has been used by the majority of customers in the market, and we have a research and development, production, sales and after-sales service. The entire system, after so many years of accumulated experience, can be said to stand up to the test of our customers.

Nylon treatment agent is used to improve the adhesion to the substrate during the coating of nylon plastics. Nylon materials have poor surface physical properties, low polarity, and often have poor adhesion, and require special treatment before they can be effectively attached. Nylon treatment agents are specially produced for these, have excellent adhesion, can spray any coating (including hand oil, UV varnish, etc.) on the treated nylon substrate. Nylon treatment agent is widely used in many aspects such as household appliances, small commodities, advanced toys, etc. It is easy to operate and can pass various tests.

Physical properties:

1, chemical composition: polymer interface polymer.

2. Density (g/cm3): 0.90.

3, flash point: about 12 °C.

4, Appearance: light yellow transparent liquid.

Instructions:

1. Wipe the nylon material to be treated to remove residual grease or release agent on the surface.

2. Spray or wipe the nylon treatment agent onto the dry film 5-10UM on the material to be treated and let it stand for 5-10 minutes.

3. Apply ink or paint and let stand for 5-10 minutes.

4. Force the coated parts to dry at 80°C for 30 minutes.

Recommended usage and dosage:

1, the full amount: 25% (for **) such as: Y-602: ** = 25:75

2. Adjust the dilution ratio according to the requirements of various different substrates.

Precautions:

1. Avoid contact with the eyes or skin. Inadvertently wash it with plenty of water and soapy water. Seek medical attention if necessary.

2, the product shelf life of 12 months, should be stored in a cool (below 30 °C) dark, well-ventilated place, away from fire.

3, after opening to seal and save in order to avoid failure.

Liên hệ chúng tôi

Author:

Mr. yinhu

Phone/WhatsApp:

+8613738410789

Sản phẩm được ưa thích
Tin tức triển lãm
IPF Nhật Bản

November 07, 2023

Á -Âu Istanbul

November 07, 2023

Công nghiệp tin tức
You may also like
Related Categories

Gửi email cho nhà cung cấp này

Chủ đề:
Thư điện tử:
Tin nhắn:

Your message must be betwwen 20-8000 characters

Liên hệ chúng tôi

Author:

Mr. yinhu

Phone/WhatsApp:

+8613738410789

Sản phẩm được ưa thích
Tin tức triển lãm
IPF Nhật Bản

November 07, 2023

Á -Âu Istanbul

November 07, 2023

Công nghiệp tin tức
Liên hệ chúng tôi
Đăng ký
Theo chúng tôi

Bản quyền © 2024 Ningbo Yinhu Innovation Material Co., Ltd. tất cả các quyền.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Gửi